cc3000

sujin vince

hi...

it's sujin

currently i am working with cc3000 wifi module, i already downloaded the Host driver, Spi driver and hyper terminal driver for cortexm4 stellaries,

my question is

1) can i use these driver packages for cortexm3 controller with my own hardware.

2) if i can modify the spi and hyper terminal drivers, what section that i want to modify

plz help me for this

By regards,

v.sujin

over 12 years ago

0 Greenja over 12 years ago

Guru 22270 points

Hello Sujin,

There is no need to redo everything. This configuration already exist for the LM3S9B96. You can download the source from http://www.ti.com/litv/zip/swrc240b

You can also find all the drivers on the LM3S9B96 product page in the software section. Even though the LM3S is NRND, all the documents and software are still available.

http://www.ti.com/product/lm3s9b96#softTool

Thanks,

0 sujin vince over 12 years ago in reply to Greenja

Intellectual 420 points

hai greenja,

iam woriking with cortexm3 of NXP lpc1769, so i want to convert these driver pack for my own developed board with lpc1769 or lpc2148 which is the ARM7 MUC,

so iam stuck in that which part i want to convert, is any other way for this plz help me for this

thanks

by regards,

v.sujin

0 Greenja over 12 years ago in reply to sujin vince

Guru 22270 points

The code from the LM3S and the CC3000 is fairly generic and should be fairly straightforward to port to the NXP M3.

NXP has a vast library when it comes to communicating with the chip and the PC. A search on their websites applications and software should provide you with the answers you need.

Perhaps some of the www.mbed.com libraries might work.

Thanks,

Wi-Fi

Wi-Fi forum

cc3000