How to switch on/off bluetooth from host machine or through c code in sitara AM335x.

Harsha J K

Other Parts Discussed in Thread: WL1271

I wrote a 'C' code for scanning the devices, scanning is happening successfully when I run the Bluetooth GUI app which is present in matrix launcher desktop to enable bluetooth.

My question here is how to enable bluetooth in AM335X without running the BT GUI app from the matrix launcher???

Thanks in Advance.

Harsha.

over 11 years ago

0 Biser Gatchev-XID over 11 years ago

TI__Guru**** 393215 points

What is your hardware, esp. what is the Bluetooth chip?

0 Miroslav Kiradzhiyski XID over 11 years ago

TI__Mastermind 25235 points

Hi Harsha,

If you are using wl1271, please take a look at this wiki page. There are command line demo scripts located in /usr/share/wl1271-demos/bluetooth/scripts/ on your device.

Best regards,
Miroslav

0 Harsha J K over 11 years ago in reply to Biser Gatchev-XID

Expert 1010 points

Hai Biser,

Bluetooth chip I am using is wl1271.

0 Harsha J K over 11 years ago in reply to Miroslav Kiradzhiyski XID

Expert 1010 points

Hai Miroslav,

I tries those commands, it is working fine, but I am interested in enabling BT from my 'C' programming code. Please help me in this issue if you find any solution.

0 Biser Gatchev-XID over 11 years ago in reply to Harsha J K

TI__Guru**** 393215 points

I will move this thread to the WLAN+BT forum. You will probably receive better support there.

0 Sundeep Javvaji over 11 years ago in reply to Biser Gatchev-XID

TI__Mastermind 32615 points

Hi,

You can check the implementation of "cmd_up()" function in Hciconfig.c file.

Wi-Fi

Wi-Fi forum

How to switch on/off bluetooth from host machine or through c code in sitara AM335x.