Home Automation Application Problem

jiong xu

Prodigy 70 points

Other Parts Discussed in Thread: MSP430FR5739

Hi!

I have a stupid question.

I want to change some demo of HomeAutomatic Application to finnish some function,like let the led

flashing in a different way.

May I only need to change CC300 Automation App ,or I need to change it with CC3000 Host Driver and CC3000 Spi?

Besides I can not find the specific location of window shaking in the demo ,can you point it out for me?

Please help me,thanks you very much.

over 11 years ago

0 Raghavendra Shenoy over 11 years ago

TI__Mastermind 27095 points

Hi,

Are you planning to use CC3000 with MSP430FR5739? If yes, then please refer to the function 'turnLedOn' function. You can use it the way you want in your application.

For the Window sensor related demo, please check server.c file. Check for the function calls following
SetupAccel();
SetupThermistor();

You need not change the CC3000 Host Driver or the CC3000 Spi driver for the above mentioned functionalities.

Thanks & Regards,
Raghavendra

0 jiong xu over 11 years ago in reply to Raghavendra Shenoy

Prodigy 70 points

Thanks for you reply.

I want to create some other function with some sensor,may i need to understand cc3000 host driving and cc3000 spi demo clearly,or I only need to finish the function demo and add it to cc3000 Automation App?

0 Raghavendra Shenoy over 11 years ago in reply to jiong xu

TI__Mastermind 27095 points

Hi,

For sensor related functionalities you need not change CC3000 Host Driver and CC3000 SPI driver. You would need to understand how sensors are managed and what sensor APIs are exposed by your host MCU.

Thanks & Regards,
Raghavendra

0 jiong xu over 11 years ago in reply to Raghavendra Shenoy

Prodigy 70 points

I got it ,thank you

Wi-Fi

Wi-Fi forum

Home Automation Application Problem