wilink 8 ble scan issue

Hi,

If you are using the correct SP from here https://github.com/TI-ECS/bt-firmware, then BLE should be on when you turn on BT.

after turning on BT can you do a "hcitool lescan" and see.

also check the local supported features

Hello,

 I'm using the binary calle TIInit_11.8.32.bts from the root directory there. Is that the correct one?

BR

//Henrik

Yes.

Hi Henrik,

I'm using IMX53 , kernel 2.6.35.x ( same as you , for the same reason , Video) 

I think I'm heading the same way as you, did , ... 

At very-first the GLUE-driver was never called this seems to be a version check ( SD-V3) in the code that makes the .x code to decide it can not continue.

At this time I'm kind of stuck on the SDIO interface that bails out with some error -110 .. looking into more details what I find here.

Q: A question I have for you , what is the version for WIlink8 you used to make it work with 2.6.35.xx ?

I did try some versions in the mean time, but there are plenty of undefined constants and variables into the wilink8 code ( that is supposed to run on kernel 3.2 , while I'm trying to make it work on 2.6.35.x)

Kind Regards, 

Noel

Hi,

I did not get you. You question is related to Bluetooth or WiFi? 

Please raise a new query for WLAN, a the subject is related to BLE.