OMAP3530 wince MMC2: problem with support

SimpleSoft

Other Parts Discussed in Thread: WL1271

Good day!

I am using MMC2 inteface for WiFi SDIO chip (88w8686).

When i turn on SDHC2 module (in ti_evm_3530.bat clear BSP_NOSDHC2 env), system cannot load driver for SDIO WiFi and in MMC1 SDCard cannot start, but when SDHC2 module is disabled MMC1 SDCard loaded properly.

Could anybody help me solve this problem?

over 15 years ago

0 DavidVescovi over 15 years ago

Genius 5470 points

I take it you are using CE. I finally fought through some of the issues and can tell you there are some bugs in the SDHC implementation. So much for BSquare being the SD expert.

0 CB over 15 years ago in reply to DavidVescovi

TI__Expert 3115 points

Hello,

We're happy to see community members joining the forum and helping each other. We welcome any kind of questions, but just wanted to clarify that this forum is mainly intended for the OMAP35x+WL1271 platform (www.ti.com/connectivitywiki) .

Thanks.

0 SimpleSoft over 15 years ago in reply to DavidVescovi

Intellectual 840 points

Thanks! I was used correct SdBus2 driver and than WiFi begin to work!

Sorry for incorrect discussion placement.

Wi-Fi

Wi-Fi forum

OMAP3530 wince MMC2: problem with support