• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 41 subscribers
  • Views 959 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC3200MOD load code to spi-flash ,don't use Uniflash & sl-Programmer

Grace Lai
Intellectual 605 points
Other Parts Discussed in Thread: UNIFLASH, CC3200MOD

Hi Sir,

We will PP CC3200MOD 115 pcs on 1Q 2015, we don't use Uniflash & sl-Programmer. It must use PC, we don't want to use PC to load code to spi-flash

We wanna development CC3200MOD spi-flash use our device.

The device use UART link CC3200MOD & SOP2 pull hi.

What's send protocol/command to CC3200MOD to do "ease, programming, read" (we wanna verify the flash code is correct) spi-flash ???

I cannot fine the user programming CC3200MOD spi-flash data by himself.

Thanks !!

Best Regards.

Grace