• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 40 subscribers
  • Views 587 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC3200 RF Tool

Sai Kwok
Prodigy 200 points
Other Parts Discussed in Thread: CC3200

I have installed CC3200 RF tool and want to do Rx test.

How do I check packet transmission statistics from a particular router?

What does "Address Mismatch" mean? What address does it refer to?

Thank you for help.

- Sai Kwok

  • 0
    TI__Guru 58035 points
    Hello Sai,
    Presently the RF tool does not allow adding filters to receive packets from a specific MAC address or IP address (in your case the router IP/MAC address). We will be adding this feature in subsiquent version.
    For the statistics you are lookng for you can use the "nwp_filter" example in the CC3200_SDK along with the "Transceiver Mode Application " to get the RX statistics from the specified router.
    Regards,Dham