CC3200 footprint on Eagle

Serdar Köse

Other Parts Discussed in Thread: CC3200, CC2538

I downloaded the .bxl file and ultra librarian on http://www.ti.com/product/CC3200/quality

The left window shows the preview on ultra librarian, the right one shows the converted file on Eagle CAD where the pads are short circuted

I used to convert TI's.bxl files with ultra librarian before without any problem. Is there any mistake on the .bxl file? Does anyone have the correct CC3200 library for Eagle CAD?

over 10 years ago

0 Prajay Madhavan over 10 years ago

TI__Genius 11120 points

If an allegro footprint good enough for you? we do not have Eagle CAD footprint

0 Serdar Köse over 10 years ago in reply to Prajay Madhavan

Genius 3360 points

Thank you Prajay but I have only have Eagle CAD. I used ultra librarian to convert .bxl of CC2538 which was a fine result. I wonder if .bxl file has an issue or do I need to change some convert options to get the correct footprint

0 William14730 over 10 years ago in reply to Serdar Köse

Intellectual 310 points

Prajay, why don't you make one???

0 Craig Hollabaugh over 10 years ago in reply to William14730

Intellectual 270 points

Was the cc3200 eagle footprint created? About to do it but would rather check someone else's work.

0 Prajay Madhavan over 10 years ago in reply to Craig Hollabaugh

TI__Genius 11120 points

It was never created at TI...

0 Serdar Köse over 10 years ago in reply to Craig Hollabaugh

Genius 3360 points

I created the eagle library according to the datasheet, I have ordered my boards regarding that footprint but have not verified that it is 100% correct. Therefore, you should double check with library, and would be nice to have the feedback here in case you see something is wrong

CC3200.zip

0 Craig Hollabaugh over 10 years ago in reply to Serdar Köse

Intellectual 270 points

I'll take a look this evening. Thanks for the effort, I'll let you know.

0 Craig Hollabaugh over 10 years ago in reply to Craig Hollabaugh

Intellectual 270 points

Sorry took so long. I looked over your eagle lib and verified the pinout connections as correct. The boards you ordered, was it a specific design or were you playing with the RF layout recommendations before an actual design?

0 Rich N over 10 years ago in reply to Craig Hollabaugh

Prodigy 90 points

Hey guys,

Just wondering if anyone has actually produced a board with Eagle and verified this lib?

Thanks and have a great day!

Cheers, Rich

Wi-Fi

Wi-Fi forum

CC3200 footprint on Eagle