• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 41 subscribers
  • Views 393 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

cc3200 external/production programmer

nikhil wadke
Prodigy 145 points
Other Parts Discussed in Thread: CC3200, CC3100

Hi all,

I need CC3200 production/external programmer to program binary files into CC3200 custom boards for mass product development. Is this type of programmer available? If not, what is the alternate solution?

Thanks & regards,

Nikhil.

  • 0
    Guru 21435 points
    Check out this discussion for more detail, also perform a search on this forum for key words FTDI, programmer etc, as this has been discussed many times . Basically you can use a CC3200 LaunchPad or a CC3100 EMU Boost or perhaps a FTDI TTL Cable.

    http://e2e.ti.com/support/wireless_connectivity/f/968/t/353805#pi239031348=2

    Glenn.