PXP/Find me Profile on Bluez!!!!!!

Rudresh NB

Hi All,

I want to test the PXP/Find me profile on Bluez for Wi-link 1835mod. Please let me know the link or steps for that. I am using the prebuilt images for am437xs platform.

Regards,

Rudresh

over 10 years ago

0 Sundeep Javvaji over 10 years ago

TI__Mastermind 32615 points

Hi,

Bluetopia is the official stack we support, in the default images we provide for am437x http://processors.wiki.ti.com/index.php/WL18xx_AMxxx_Platform_Integration_Guide#Prebuilt_Images, no stack is included.

As you wanted to use BlueZ, you can check it on Linux BlueZ forum.

0 Rudresh NB over 10 years ago in reply to Sundeep Javvaji

Intellectual 700 points

Hi Sundeep,

I was using Bluez, as it was part of pre built images. If i want to use the Bluetopia for am437x, where shuld i get the images ?

Regards,

Rudresh

0 Sundeep Javvaji over 10 years ago in reply to Rudresh NB

TI__Mastermind 32615 points

Hi,
You can get LINUXEZSDK-WILINK8-BT from www.ti.com/.../wilink-sw

Wi-Fi

Wi-Fi forum

PXP/Find me Profile on Bluez!!!!!!