CC3200 SOFTWARE RESET

davide padoan

Prodigy 220 points

Other Parts Discussed in Thread: CC3200

Hi All,

does exist a way to reset the cc3200 with a command or an instruction?

The only way I see, is to enable watchdog and perform a while(1) until it generates a watchdog reset.

Anyone can suggest other way to reset software the module?

Thanks in advance

Davide

over 10 years ago

0 Craig Carson over 10 years ago

Intellectual 780 points

There are a couple of other ways I'm aware of. The first would be to use the PRCMMCUReset function. However if you look in the forum the recommended method is to leverage the hibernate functionality.

I believe the hibernate method is recommended since it will ensure a full reset of the MCU whereas issuing a reset will not guarantee it.

0 Praneet Kumar over 10 years ago in reply to Craig Carson

TI__Genius 16370 points

Thanks Craig.

Davide,

Let me know if it answers your question.

-/Praneet

0 Praneet Kumar over 10 years ago in reply to Praneet Kumar

TI__Genius 16370 points

Davide, I'm closing this thread. For any additional questions that you might have on the topic, request you to start a new thread w/ references to the current one for us to track it better.

-/Praneet

0 thanga raj over 10 years ago

Genius 3690 points

Entering into Hibernate and Making Slow clock as a Wake up source can also be a solution .

0 thanga raj over 10 years ago

Genius 3690 points

Hi David you can also go into Hibernate with slow clock as wake up source that will reboot the cc3200

Wi-Fi

Wi-Fi forum

CC3200 SOFTWARE RESET