Mysimplelink.net examples

The CC3200 has an Internal HTTP Server, you can use the mysimplelink.net URL to access this by default, but you can also change this.

As Markel has suggested, you will find out more the programmers guide

Glenn.

Markel, Thank you for your help.

I read your recommendation, " CC3100\CC3200 SimpleLink™ Wi-Fi® Network Processor Subsystem Programmer's Guide."

but there wasn't what i wanted.

Actually, I want to configure that example HTTP server(Mysimplink.net). especially demo which can control GPIO in Mysimplelink.net.

Could I know where it is?

P.S After finding that, I'm planning to add function SSL in that HTTP's GPIO DEMO.

I really appreciate for your help, Glen.
I found out more in the programmers guide.
But I couldn't find real example in the guide.
Could I know your recommendations in SDK Examples (relates to controlling GPIO and SPI by using WiFi) ?

Hi,

You need to learn how the entire http server works. The Guide will help you understand.

The relevant infos you need in the Guide are under HTTP Server. But it will benefit you a lot to read the entire Guide.

- kel

As Markel has said you can learn a lot from reading the guide.

As for how you do what you want to do...a good place to start is the http_server and spi examples that come with the SDK, combine these together. (That is if you wanted to use the http_server as a control mechanism.

Otherwise you could use my iOS App example and Project and combine this with the spi example. For my examples open source code view my Github here - https://github.com/remixed123

Glenn.

Hi Glenn, Markel,
Thanks for your answers.

Hi wonjun jeong,
As suggested by Glenn and Markel, please spend some time exploring the http_server example, you would get better idea about how you can achieve your objective.

Regards,
Raghavendra