• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 39 subscribers
  • Views 316 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Programming my own CC3200 board using CC3200-LAUNCHXL

Saleh Mehdikhani
Intellectual 340 points
Other Parts Discussed in Thread: CC3200, CC3200-LAUNCHXL

Hi

I have developed my application using CC3200-LAUNCHXL and now I am going to design my own CC3200 based PCB.

Is it possible to program flash memory of my own board using CC3200-LAUNCHXL and if yes, which pins should be connected between my board and LauncPad board?