CC3200 UDP Socket Server IP Address

Juhee Park

Prodigy 100 points

Other Parts Discussed in Thread: CC3200

Dear,

I am using the CC3200 in AP mode.

I did try UDP socket communication.

UDP server is CC3200 and client is my computer.

UDP client program was written by QT program in my computer.

UDP client need server IP address for UDP socket connection.

But, I can't find server IP address.

Would it be possible to set or get UDP server IP?

If not, Please inform me how to use server IP.

Regards!

Juhee Park.

over 10 years ago

0 Raghavendra Shenoy over 10 years ago

TI__Mastermind 27095 points

Hi,

The IP is nothing but the gateway IP of the CC3200 AP.

Please add the below print message after 'sl_NetCfgGet(SL_IPV4_AP_P2P_GO_GET_INFO,&ucDHCP,&len, (unsigned char *)&ipV4);' in WlanAPMode function of 'getting_started_with_wlan_ap' example.

 UART_PRINT("IP %d.%d.%d.%d MASK %d.%d.%d.%d GW %d.%d.%d.%d DNS %d.%d.%d.%d\n\r",
            SL_IPV4_BYTE(ipV4.ipV4,3),SL_IPV4_BYTE(ipV4.ipV4,2),SL_IPV4_BYTE(ipV4.ipV4,1),SL_IPV4_BYTE(ipV4.ipV4,0),
            SL_IPV4_BYTE(ipV4.ipV4Mask,3),SL_IPV4_BYTE(ipV4.ipV4Mask,2),SL_IPV4_BYTE(ipV4.ipV4Mask,1),SL_IPV4_BYTE(ipV4.ipV4Mask,0),
            SL_IPV4_BYTE(ipV4.ipV4Gateway,3),SL_IPV4_BYTE(ipV4.ipV4Gateway,2),SL_IPV4_BYTE(ipV4.ipV4Gateway,1),SL_IPV4_BYTE(ipV4.ipV4Gateway,0),
            SL_IPV4_BYTE(ipV4.ipV4DnsServer,3),SL_IPV4_BYTE(ipV4.ipV4DnsServer,2),SL_IPV4_BYTE(ipV4.ipV4DnsServer,1),SL_IPV4_BYTE(ipV4.ipV4DnsServer,0));

Regards,
Raghavendra

0 Juhee Park over 10 years ago in reply to Raghavendra Shenoy

Prodigy 100 points

Hi Raghavendra,

Thank to you. I solved the problem.

Juhee Park.

0 Raghavendra Shenoy over 10 years ago in reply to Juhee Park

TI__Mastermind 27095 points

Hi,

Good to know you solved the problem. I am closing this thread.

Regards,
Raghavendra

Wi-Fi

Wi-Fi forum

CC3200 UDP Socket Server IP Address