WL1837MODCOM8I Reference Design Documents in Altium?

albert lee3

Other Parts Discussed in Thread: WL1837MODCOM8I

Is it possible to provide the schematic and layout files of the WL1837MODCOM8I Evaluation Board in Altium format??

Below is the link where the files are provided.

http://www.ti.com/product/WL1837MOD/toolssoftware

over 10 years ago

0 Joseph Gigi over 10 years ago

TI__Guru* 85400 points

HI,

We have only the module symbol in Altium all the rest is in PADS.

Regards,
Gigi Joseph.

0 albert lee3 over 10 years ago in reply to Joseph Gigi

Prodigy 240 points

Is it possible to export/convert the PADS schematic & layout files into Altium readable format??

0 Joseph Gigi over 10 years ago in reply to albert lee3

TI__Guru* 85400 points

Hi,

Haven’t done it myself but by free search:

techdocs.altium.com/.../Moving+to+Altium+Designer+from+Pads+Logic+and+PADS+Layout
www.altium.com/.../pads-migration-guide-book

Regards,
Gigi Joseph.

0 albert lee3 over 10 years ago in reply to Joseph Gigi

Prodigy 240 points

Is it possible to help me convert the .pcb file into PADS ASCII file for me?
Because Altium only accepts the .asc file from PADS that can then be converted to Altium files.

FYI. I tried to download a trial version of PADS, and could not get it to read the .pcb file.
It said "Could not determine how this design was created. Expedition PE cannot be invoked on this design."
However, I can open it through the free PADS Layout Viewer.

Thanks,
ALbert