cc3200 - Changing Stack memory issue

jeff belz

I've noticed that when I try to change my Stack size...it actually does not change. I change it by going into the setting below. But when I check my resources it remains at 0x2000. I'm I not changing the stack right? or is this a bug?

over 10 years ago

0 jeff belz over 10 years ago

Intellectual 560 points

I had a picture but it did not post, I use the Basic option in the linker screen

0 Ankur Baranwal over 10 years ago

TI__Mastermind 26205 points

Hi Jeff,

Are you using any OS? if yes which one?

Reg

0 jeff belz over 10 years ago in reply to Ankur Baranwal

Intellectual 560 points

I'm using the ti_rtos

0 Ankur Baranwal over 10 years ago in reply to jeff belz

TI__Mastermind 26205 points

With TI RTOS you need to change the ti-RTOS config file (.cfg) available under ti_rtos_config project.

Regards,
Ankur

Wi-Fi

Wi-Fi forum

cc3200 - Changing Stack memory issue