• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 39 subscribers
  • Views 515 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC3200MOD SOP2 Pin Pulldown

Andrew Felicetti
Prodigy 345 points

Hi Team,

The TI recommended pulldown resistor for SOPD2 is 2.7k, could this be swapped to a 4.7k or a 1k instead?  If so, which one would be a suitable replacement?

Thank you,

Andrew