WL1837MOD : AP on 2.4GHz & 5GHz at same time

Nico

Other Parts Discussed in Thread: WL1837, WL1837MOD

Hi,

customer is not able to find the information if the chip/firmware/driver enable to have the AP only else on 2.4GHz , else on 5GHz ..or if its' possible t have it on both at same time

thanks for the detailled capabilities

best regards

Nicolas

over 8 years ago

0 Eyal Reizer over 8 years ago

TI__Mastermind 20285 points

wilinlk (wl1837) supports both 5Ghz and 2.4Ghz simultaneously.

When the AP is started it can be configured on any channel either in 2.4Ghz or 5Ghz provided is allowed in your region.

No need to start it differently for 2.4 or 5Ghz.

BR,

Eyal

0 Nico over 8 years ago in reply to Eyal Reizer

TI__Expert 6160 points

Thanks,
so can you set the AP to work in 5GHz and 2.4GHz ...or only 2.4Ghz or 5GHz ...i'm not too sure i undertood above answer

thanks

nico,

0 Nico over 8 years ago in reply to Nico

TI__Expert 6160 points

to be more precise : can you set wl1837mod as AP to work in 5GHz and 2.4GHz simultaneously.

thanks

Nico

Wi-Fi

Wi-Fi forum

WL1837MOD : AP on 2.4GHz & 5GHz at same time