CC3200STK-WIFIMK: change the refresh time for IBM Watson IoT Platform monitoring

Manuel Gutierrez15

Part Number: CC3200STK-WIFIMK
Other Parts Discussed in Thread: CC3200

How to change the sensor refresh time for the IBM Watson IoT Platform dashboard? I am guessing that the 1-sec interval is depleting the battery of my SensorTag CC3200.

Any help is greatly appreciated.

Thank you.

over 7 years ago

0 made4engineering over 7 years ago

TI__Mastermind 27460 points

Hi Manuel,

Have you set up the device on IBM cloud?

0 RogerMonk over 7 years ago in reply to made4engineering

TI__Expert 3410 points

Hello Manuel,

Currently, there is no graphical way to configure the update rate, however, you can configure this parameter using an HTTP POST command.

The default poll-rate is set to 1 second.

To change the poll-rate, you could try the following :-

// Set poll rate to 5 seconds (range is 1..600)
wget --post-data="__SL_P_RTE=5" http://<ipaddressofsensortag>

Hope that helps,
~roger

Wi-Fi

Wi-Fi forum

CC3200STK-WIFIMK: change the refresh time for IBM Watson IoT Platform monitoring