WL1807MOD: WILINK8-WIFI-MCP8 driver for STM32

Mira H.

Part Number: WL1807MOD
Other Parts Discussed in Thread: WILINK8-WIFI-MCP8

Hi,

I am developing a system with the WL1807 and an STM32 microcontroller. After some research on the TI website I found the driver WILINK8-WIFI-MCP8 which I want to use with FreeRTOS on the STM32.

Is there an example on how to use it? A hint on how to transmit or receive some signal would be great.

Best regards,

Mira

over 8 years ago

0 Iain Hunter over 8 years ago

TI__Genius 16130 points

Hi Mira,
The MCP driver is supplied as a Linux driver which can be used as the basis of a port to an RTOS. You could try and migrate to FreeRTOS yourself but we do not offer any support on it. Clarinox already have a port for freeRTOS on STM32. You can find more details at http://clarinox.com/
Iain

0 Mira H. over 8 years ago in reply to Iain Hunter

Prodigy 20 points

Hi Iain,
Thank you for your reply.
To me it wasn't clear, that "RTOS baseline" meant this, but I understand now.
Mira

Wi-Fi

Wi-Fi forum

WL1807MOD: WILINK8-WIFI-MCP8 driver for STM32