• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 40 subscribers
  • Views 582 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC3220: program cc3220SF

Amir LOUATI
Prodigy 30 points
Part Number: CC3220
Other Parts Discussed in Thread: UNIFLASH, CC3200

Hi,

I'm designing an IOT sensor based on cc3220SF MCU.

I would know if there is any FTDI chip that can flash the mcu?

I used to use FT234XD to program cc3200 MCU. but this ftdi is not compatible with Uniflash 4.2 since it don't contain the reset gpio.

  • 0
    TI__Mastermind 38980 points
    Hi Amir,

    Uniflash v4 is configured to use the XDS-110 and the FT2232D for programming the CC3220SF. These are the JTAG emulator/UART programming devices that are onboard the CC3220 Launchpads and the CC3200 Launchpads respectively.

    You can also take a look at the CC3220 Production Line Guide to see what is required for programming: http://www.ti.com/lit/swra568

    Best regards,
    Sarah