CC3220MOD: Debugging tool

Vincent Vuarnoz

Expert 2545 points

Part Number: CC3220MOD

Hi community !

It might be a common question but I couldn't find a precise answer on the forum so far.

I am now developing and debugging my CC3220 through the LAUNCHXL evaluation board.

Is it possible to use it for our final board debugging? Or do we have to buy another "debugger" ?

Thanks !

over 7 years ago

0 Jan D over 7 years ago

Guru 80025 points

Hi,

Yes, you can use your LunchPad to debug your board. You don't need buy another debugger.

Jan

0 Vincent Vuarnoz over 7 years ago in reply to Jan D

Expert 2545 points

Thanks.
Is there other tool that can be used? Because the prototypes will have to be programmed in the production and they will need to use some kind of programming tool.

0 Jan D over 7 years ago in reply to Vincent Vuarnoz

Guru 80025 points

Hi,

See production line guide: www.ti.com/.../getliterature.tsp (even though it is for QFN CC3220, main parts of the guide can be applied to CC3220MOD also).

Jan

0 Vincent Vuarnoz over 7 years ago in reply to Jan D

Expert 2545 points

Hey Jan,
May I ask what is the procedure in order to debug on our PCB with the launchxl ?
Is it enough to remove the jumpers and connect the TMS, TCK, TDI, TDO signals directly to the CC3220 on our PCB?
Thanks !

0 Jan D over 7 years ago in reply to Vincent Vuarnoz

Guru 80025 points

Hi,

and GND and it should be OK.

Jan

0 Vincent Vuarnoz over 7 years ago in reply to Jan D

Expert 2545 points

Great !

Wi-Fi

Wi-Fi forum

CC3220MOD: Debugging tool