CC3220SF-LAUNCHXL: newbie problems

Shamil Farsiev

Expert 1515 points

Part Number: CC3220SF-LAUNCHXL
Other Parts Discussed in Thread: UNIFLASH

Hi everyone! sorry for my english!

ok, i have the CC3320SF LUAUNCHXL launchpad Rev-A and i like it much.

i have linux Ubuntu 16.04 lts, CCS 7.3.0.00019, xds110 drivers and uniflash 1.0.17.7.

i had started and flashing programs from examples and demos in debug mode. it was worked nice!

but, right now:

1) i don't understand how to start my own program without debug mode in CCS ...

2) and i don't understand how to start cc3220 from AA batteries; what jumpers positions?

3) how to use UniFlash? how to program my launchpad by it?

can you write detailed "howto" and "getting started" or else?

i had read a lot of manuals but this moments like in "fog of war"

if this trables was - can ypu give me a link of topic?

and again - sorry for english

over 7 years ago

0 Charles Oladimeji over 7 years ago

TI__Mastermind 33805 points

Hi,

Please see users guide linked below
www.ti.com/.../swru463.pdf

and uniflash guide below
processors.wiki.ti.com/.../UniFlash_v4_Quick_Guide

Regards,
Charles O

0 Shamil Farsiev over 7 years ago in reply to Charles Oladimeji

Expert 1515 points

i read. but it is understatable.
i did like in guides but nit work. www.ti.com/.../swru463.pdf - i placed jumpers like in the pics . and nothing
processors.wiki.ti.com/.../UniFlash_v4_Quick_Guide - not for cc3220. i see absolutely different buttons. in what place i need place the way to my *.bin file? i jjust want to know where is tho buttons: "way to file" and "program!"

0 Shamil Farsiev over 7 years ago in reply to Charles Oladimeji

Expert 1515 points

ok. here my screenshot:

as you can see - quickstart guid and my version is different.

how can i program my own *.bin and start it?
about swru461 - i used different jupmers positions but out-of-box program doesn't start/

0 Charles Oladimeji over 7 years ago in reply to Shamil Farsiev

TI__Mastermind 33805 points

you need to be using uniflash V4 for the CC3220
processors.wiki.ti.com/.../Category:CCS_UniFlash

Also see getting started guide
www.ti.com/.../swru461.pdf

Regards,
Charles O

0 Shamil Farsiev over 7 years ago in reply to Charles Oladimeji

Expert 1515 points

ok, good.
swru461 page 26 figure 3-10. Is it same file in text boxes"secure file" and "Signature Source file" or not?
i had been installed SDK by Resource Explorer in CCS. i have no way like in swru461 like <sdk-installation>\tools\certificate-playground
i have /home/sam/ti/simplelink_cc32xx_sdk_1_50_00_06/tools/cc32xx_tools/certificate-playground
is that equal ways or not?

0 Shamil Farsiev over 7 years ago in reply to Charles Oladimeji

Expert 1515 points

and!

i do it right now, step by step in swru461. i have built *.bin file from example (download from res expl). nothing change. but i have this message

what wrong am i doing?

0 Shamil Farsiev over 7 years ago in reply to Charles Oladimeji

Expert 1515 points

and, i have this:

0 Shamil Farsiev over 7 years ago in reply to Charles Oladimeji

Expert 1515 points

wtf?! WTF?! i do everliving like in swru461 but IT DOES NOT WORK! can you answer me?!

0 Charles Oladimeji over 7 years ago in reply to Shamil Farsiev

TI__Mastermind 33805 points

Hi,

The documents provided shows in details how to program the board.

What error do you get when you try to program? What is the SOP config? Can you post a picture of the board?

Regards,

Charles O

0 Shamil Farsiev over 7 years ago in reply to Charles Oladimeji

Expert 1515 points

ok. everethin good. it flash.

swru461 page 29. nowhere is write to get check dummy cert files before do action select MCU image and browse.

your mistake.

people who see this instruction first time will be upset like me.

Wi-Fi

Wi-Fi forum

CC3220SF-LAUNCHXL: newbie problems