RTOS/CC3200-LAUNCHXL: cc3200

Kavya Vajja

Part Number: CC3200-LAUNCHXL
Other Parts Discussed in Thread: CC3200

Tool/software: TI-RTOS

CAN WE SEND SIGNALS TO TURN ON AND OFF THE DEVICE DIRECTLY FROM CC32000 WIRELESSLY WITHOUT ANY TRANSMITTER.also i need connect more devices like 5 to 6 with feedback there are only 4 inbuilt adc how to do it

over 7 years ago

0 Shlomi Itzhak over 7 years ago

TI__Guru 64455 points

Hello,

Your questions are not very clear.

Can you describe your setup in more details?

How do you want to connect? you mentioned wirelessly but also mentioned ADC.

Please clarify.

Regards,

Shlomi

0 Kavya Vajja over 7 years ago in reply to Shlomi Itzhak

Prodigy 50 points

i need to send on or off command wirelessly and get back whether the device is on or off

0 Shlomi Itzhak over 7 years ago in reply to Kavya Vajja

TI__Guru 64455 points

But if the device is off, how can you send anything?

You can always use the device in AP mode and if you can see it while scanning, it is ON. Then you can connect to it and do whatever you need.

If you cannot see it, it is OFF. But you would not be able to turn it ON remotely.

Shlomi

0 Kavya Vajja over 7 years ago in reply to Shlomi Itzhak

Prodigy 50 points

device i mean here is not cc3200 ,but end devices controlled by cc3200

0 Shlomi Itzhak over 7 years ago in reply to Kavya Vajja

TI__Guru 64455 points

and how are these devices connected to CC3200? at what interface?

Wi-Fi

Wi-Fi forum

RTOS/CC3200-LAUNCHXL: cc3200