CC3100SDK: tiva_wifi_nfc_ap: Symbol/Linker errors

LouEEEE!

Expert 1955 points

Part Number: CC3100SDK

Trying to build the tiva_wifi_nfc_ap (tidcav8); mileage below is seen using both CC-3100SDK 1.1 and 1.2. Have applied all patches and service packs

error #10056: symbol "registerInterruptHandler" redefined: first defined in "./CC3100_board.obj"; redefined in "C:/ti/tirtos_tivac_2_16_01_14/products/tidrivers_tivac_2_16_01_13/packages/ti/drivers/lib/drivers_wifi_tivaware.aem4f<WiFiCC3100.oem4f>"
error #10056: symbol "spi_Read" redefined: first defined in "./CC3100_spi.obj"; redefined in "C:/ti/tirtos_tivac_2_16_01_14/products/tidrivers_tivac_2_16_01_13/packages/ti/drivers/lib/drivers_wifi_tivaware.aem4f<WiFiCC3100.oem4f>"
error #10056: symbol "spi_Close" redefined: first defined in "./CC3100_spi.obj"; redefined in "C:/ti/tirtos_tivac_2_16_01_14/products/tidrivers_tivac_2_16_01_13/packages/ti/drivers/lib/drivers_wifi_tivaware.aem4f<WiFiCC3100.oem4f>"
error #10056: symbol "spi_Write" redefined: first defined in "./CC3100_spi.obj"; redefined in "C:/ti/tirtos_tivac_2_16_01_14/products/tidrivers_tivac_2_16_01_13/packages/ti/drivers/lib/drivers_wifi_tivaware.aem4f<WiFiCC3100.oem4f>"
error #10056: symbol "spi_Open" redefined: first defined in "./CC3100_spi.obj"; redefined in "C:/ti/tirtos_tivac_2_16_01_14/products/tidrivers_tivac_2_16_01_13/packages/ti/drivers/lib/drivers_wifi_tivaware.aem4f<WiFiCC3100.oem4f>"

error #10010: errors encountered during linking; "tiva_wifi_nfc_ap.out" not built

Thanks for any insights!

over 7 years ago

0 Shlomi Itzhak over 7 years ago

TI__Guru 64455 points

Hello,

I am not aware of any nfc related example under cc3100SDK.

CAn you please clarify?

Shlomi

0 LouEEEE! over 7 years ago in reply to Shlomi Itzhak

Expert 1955 points

Hello Shlomi,

Am trying to build this TI Reference Design:

Am quite sure I'm running into SDK version discrepancies - but don't know how to circumvent. Better, don't see clearly how to upgrade to latest SDK - likely the better path forward anyway.

0 Shlomi Itzhak over 7 years ago in reply to LouEEEE!

TI__Guru 64455 points

Hi,

I am not aware of this TID but the errors you get are for spi_Open/spi_Close/spi_Read/spi_Write/registerInterruptHandler.

These are defined in the user.h file where all other platform dependent stuff is defined.

You are probably using a library that already has those symbols and compiling the simplelink host driver which also has it.

Regards,

Shlomi

Wi-Fi

Wi-Fi forum

CC3100SDK: tiva_wifi_nfc_ap: Symbol/Linker errors