WL1807MOD: WLAN Performance for MIMO

paddu2017

Part Number: WL1807MOD

Hi,

WL1807MOD Datasheet "5.6 WLAN Performance: 2.4-GHz Receiver Characteristics"
shows data for "RF_ANT1 Pin 2.4-GHz SISO", what could the receiver performance if we
enable both antennas "ANT1+ANT2(MIMO)" ?

Best Regards
Paddu

over 7 years ago

0 S over 7 years ago

TI__Mastermind 35795 points

Hi Paddu,
Same table list values for MIMO mode - example MCS12,13,14,15 are modulations for MIMO

Saurabh

0 paddu2017 over 7 years ago in reply to S

Expert 2885 points

Hi Saurabh,

Thank you.

Actually, "5.6 Receiver Characteristics" table don't have data of MCS12,
only MCS13,14,15 is mentioned in the datasheet.
So, MCS13,14,15 are Receiver performance for ANT1+ ANT2 MIMO?

Best Regards
Paddu

0 S over 7 years ago in reply to paddu2017

TI__Mastermind 35795 points

Yes, that is correct .

Thanks
Saurabh

0 paddu2017 over 7 years ago in reply to S

Expert 2885 points

Hi Saurabh,

Thank you.

One final confirmation,

The Table "2.4-GHz Receiver Characteristics" is for RF_ANT1,
is the performance of "RF_ANT2" same as RF_ANT1?
Can we refer the same table for RF_ANT2 Receiver Characteristics?

Best Regards
Paddu

0 S over 7 years ago in reply to paddu2017

TI__Mastermind 35795 points

Yes.

Saurabh

Wi-Fi

Wi-Fi forum

WL1807MOD: WLAN Performance for MIMO