CC3200-LAUNCHXL: Device is't found in SmartConfig Provisioning example code

Hamideh manoochehri

Part Number: CC3200-LAUNCHXL

I try to run SmartConfig Provisioning example with CCS and my iPhone. I read the related document and this page: processors.wiki.ti.com/.../CC3200_SmartConfig_Provisioning

I did this steps:

1- I connected my iPhone to the router.

2- I ran the example with CCS.

3- I ran the SimpleLinkStarter Pro application.

4- I entered the network password

5- I press the start configuration button

6- I get this message: Please go to device settings and connect your WiFi to a network called "mysimplelink" and return to this app. but there isn't a mysimplelink_xxxxxx SSID . and the device isn't found.

How can I run this example code?

Best regards.

over 7 years ago

0 Vincent Rodriguez over 7 years ago

TI__Mastermind 28285 points

Hamideh,

have you taken a look at the getting started guide? the guide walks you through what you need to do for the provisioning demo.

<cc3200-sdk>\docs\CC3200-Getting Started Guide.pdf'

Let me know if that helps you.

Regards,
VR

0 Aklaaa over 7 years ago

Intellectual 320 points

Did you set your controller in AP mode, by shorting Vcc and pin 58?
Only once you do that and press reset will you be able to view mysimplelink_xxxxxx once you run the code.

Wi-Fi

Wi-Fi forum

CC3200-LAUNCHXL: Device is't found in SmartConfig Provisioning example code