Linux: [WL18XX] Parallel operation of 2 WiFi radios in one system

nathan kuo

Tool/software: Linux

Hi,

Is it possible to run 2 TI WL18xx chip in one system(Linux) and to address both chip simultaneously by the controller via the SDIO interface?

Do you have any ideas about it?

Nathan Kuo

over 7 years ago

0 Eyal Reizer over 7 years ago

TI__Mastermind 20285 points

Hi,

In case your host has two SDIO controllers that each once can be connected to a separate wl18xx device, then this should be possible.
Of course you would also need two GPIOs for each wl18xx device(wlan_en and wlan_irq for each device).

Best Regards,
Eyal

0 nathan kuo over 7 years ago in reply to Eyal Reizer

Expert 1060 points

Hi Eyal,

Thanks for your answer.

Nathan Kuo

Wi-Fi

Wi-Fi forum

Linux: [WL18XX] Parallel operation of 2 WiFi radios in one system