• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 40 subscribers
  • Views 1423 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC3220: AT command example to perform Wi-Fi Direct

Hideaki Nambu
Mastermind 9165 points

Part Number: CC3220

Hello,

Do you have an example procedure to perform Wi-Fi Direct via the sample code "serial_wifi" ?

My cutomer is looking for a Serial-Wi-Fi converter which supports Wi-Fi-Direct.

  • 0
    TI__Mastermind 45206 points
    Hi Hideaki,

    We unfortunately don't have any example programs built off of AT commands. You would have to develop this on your own.

    If you're looking for help on the Wi-Fi Direct (P2P) side of your application, you could look into the network_terminal demo program to see how it handles the connection. You would then have to figure out what AT commands to use.

    hope this helps,
    Kevin