WL1835MOD: wl1835MOD

Mohsen Khayami

Part Number: WL1835MOD

With the WOWLAN document at the below site i like to know how to wake up on gtk_rekeying. In the document this is not clear at all.

processors.wiki.ti.com/.../WL18xx_Adding_WoWLAN

From teh WOWLAN document

iw WoW commands:

iw <phyname> wowlan enable [any] [disconnect] [magic-packet] [gtk-rekey-failure] [eap-identity-request] [4way-handshake] [rfkill-release] [patterns <pattern>*]

Thanks

Regards

Mohsen

over 7 years ago

0 S over 7 years ago

TI__Mastermind 35795 points

Moshen ,
Can you pls set filter for EAPOL pkts and test:

example:
Wake up on any EAPOL traffic directed at MAC 00:44:44:44:44:44
iw phy0 wowlan enable patterns 00:44:44:44:44:44:-:-:-:-:-:-:88:8e

Thanks
Saurabh

0 Mohsen Khayami over 7 years ago in reply to S

TI__Mastermind 22391 points

Hi Saurabh
it looks like they already have done that in the patterns.. What is the next thing to try. O why it does not wake up when the GTK rekey...

Thanks

Mohsen

0 S over 7 years ago in reply to Mohsen Khayami

TI__Mastermind 35795 points

Mohsen ,
GTK configuration is via EAPOL frames . In case EAPOL filters didn't work - i suggest sharing sniffer trace / driver , firmware logs for the failing scenario.

Thanks
Saurabh

0 Mohsen Khayami over 7 years ago in reply to S

TI__Mastermind 22391 points

Hi Saurabh
i will send those in a separate email...

Wi-Fi

Wi-Fi forum

WL1835MOD: wl1835MOD