WL1837MOD: Disabling DFS channels via regulatory.bin file

Brad Griffis

Part Number: WL1837MOD

In this response, Gigi mentions that to "fully disable" certain channels it would need to be done through the regulatory.bin file. Can someone please explain the method? I've been looking at the WL18xx .INI File app note for the info, but I didn't see it.

over 7 years ago

0 Eyal Reizer over 7 years ago

TI__Mastermind 20285 points

Hi Brad,

This eems like a general regulatory domain question.
Have you checked the following link?:
wireless.wiki.kernel.org/.../wireless-regdb

You can define a new region specifying the available channels the system can work on.

Is this what you were looking for?

BR,
Eyal

0 Brad Griffis over 7 years ago in reply to Eyal Reizer

TI__Guru*** 125430 points

Oh, I thought Gigi was referring to the ini->bin file. Looking at the info you sent though, I think you’re right and he was referring to the *CRDA* regulatory.bin. Thanks!!!

Wi-Fi

Wi-Fi forum

WL1837MOD: Disabling DFS channels via regulatory.bin file