CC3200STK-WIFIMK: No connection with WPA2 secured network

Sebastian Dedinak

Hello

my problem is : When trying to get the TI SimpleLink WiFi SensorTag into an existing network with WPA2 it doesn't connect. I tried it without password and encoding and it worked but i need it to work in a secured environment.

Thanks,

Sebastian

over 7 years ago

0 Sebastian Dedinak over 7 years ago

Prodigy 30 points

Update: First I got it running with WPA 2 but only with TKIP. After that I tried updating to the last firmware. After that it stopped connecting to any other wlan. Didn't matter which security settings I had. After downgrading the SensorTag back to basic software. Suddently it works even with WPA2 and AES . I don't know what leads to this changes.

0 made4engineering over 7 years ago in reply to Sebastian Dedinak

TI__Mastermind 27605 points

HI Sebastian,

Perhaps this had to do with the service pack, but I cant be sure. We recommend all development efforts begin on a Launchpad though, as a sensortag is not suitable.

-Aaron

Wi-Fi

Wi-Fi forum

CC3200STK-WIFIMK: No connection with WPA2 secured network