CCS/CC3200: Print on console

ABHAY VASHISTHA

Part Number: CC3200
Other Parts Discussed in Thread: UNIFLASH

Tool/software: Code Composer Studio

hello,

I am going through the CC3200 sdk I2C code example . This example is using UART print by hyper terminal .

Is it not possible to use print f function for CC3200 , if yes please suggest how to do this.

0 Shlomi Itzhak over 7 years ago

Hello,

The i2c demo does have terminal printing capabilities.

You can see the InitTerm() initialization and the call to Report() API, e.g. in the DisplayBanner() function.

What exactly is not working for you?

Shlomi

0 ABHAY VASHISTHA over 7 years ago in reply to Shlomi Itzhak

Hello Shlomi,

Tera term pop up says

cannot open com port 17 .

I dont want to do testing after falshing the code in flash memory by uniflash .

0 Shlomi Itzhak over 7 years ago in reply to ABHAY VASHISTHA

are you sure this is the com port you should use?

can i see a acreen capture of the device manager when the launchpad is connected?

Also, make sure you do not have another utility grabbing the same com port (like uniflash for example).

Shlomi

0 ABHAY VASHISTHA over 7 years ago in reply to Shlomi Itzhak

thanks issue is resolved .

Wi-Fi forum