CC3220MODA: develop my first pcb board with cc3220

Chris Allen

Part Number: CC3220MODA

I been programing a cc3220 launch pad and have most of my program done. I'm working on creating my own pcb board with chip but having a problem on figure out what i should do to so i can load the cc32200 chip with my software. What kind of connection do i need to make so i can program it. untitled.sch.pdf

over 8 years ago

0 Kevin Allen18 over 8 years ago

TI__Mastermind 45606 points

Hi Chris,

Since you are creating your own board I'd recommend you follow the guidelines/checklist on the Hardware Design Review wiki page:

processors.wiki.ti.com/.../CC3120_&_CC3220_Hardware_Design_Review

For programming your board you can either use SPI or UART. If you're also intending on debugging your software in CCS, JTAG would be required as well.

The Production Line Guide goes through the SPI/UART programming process:

www.ti.com/lit/swra568

Let me know if there are any other specific questions you might have.

Best,
Kevin

Wi-Fi

Wi-Fi forum

CC3220MODA: develop my first pcb board with cc3220