CC3220-VIDEO-CAMERA-SOFTWARE: Writing Firmware to the OV788

Marcio Albano Hermelino Ferreira

Part Number: CC3220-VIDEO-CAMERA-SOFTWARE
Other Parts Discussed in Thread: UNIFLASH

I have one question regarding the organization from the CC3220 OV788 kit. How can I write firmware to the OV788? Is there any software from Omnivsion for doing it? It is correct to say that Uniflash writes firmware only for the OV9732 imaging sensor?

Regards,

Marcio

over 6 years ago

0 Toby over 6 years ago

TI__Mastermind 32860 points

Hi Marcio,

According to the reference guide ( http://www.ti.com/lit/an/swra599/swra599.pdf ) section 3.1, the CC3220 will program the OVA788.

Regards,
Toby

0 Marcio Albano Hermelino Ferreira over 6 years ago in reply to Toby

Prodigy 50 points

Thanks for the information Toby.

Does the same holds for the MSP430 contained in the OV788 board?

0 Toby over 6 years ago in reply to Marcio Albano Hermelino Ferreira

TI__Mastermind 32860 points

The reference guide makes no mention of MSP430, so you shouldn't need to worry about that.

You can consider the entire OV788 module is programmed by the CC3220.

0 Marcio Albano Hermelino Ferreira over 6 years ago in reply to Toby

Prodigy 50 points

Thank you Toby.

Regarding this question, my doubt is solved. We are trying to make this camera module work, but it is still not working. I opened another thread for the specific problem (e2e.ti.com/.../696922). I don't know if you can also help me there, but if you do, I would really appreciate.

Regards,

Marcio

Wi-Fi

Wi-Fi forum

CC3220-VIDEO-CAMERA-SOFTWARE: Writing Firmware to the OV788