WL1807MOD: WL1807MOD

Hi,

If you are using the module in your product its recommended that you test for the following in production:

1) connect to an AP and validate that you can connect at both 2.5GHz and 5GHz. This will ensure that you have the antenna connected and the module is operating as expected. This will also check the SDIO bus operation from the host.
2) You may also want to check current draw when transmitting at a know rate to ensure proper operation.
3) I don't believe you need to look at EVM or spectral mask as you should be good based on the AP connection.

I hope this helps.

Thanks,
Riz

Your welcome!