RTOS/CC3220SF-LAUNCHXL: RTOS/CC3220SF-LAUNCHXL

Uri Galil

Part Number: CC3220SF-LAUNCHXL
Other Parts Discussed in Thread: UNIFLASH, CC3220SF

Tool/software: TI-RTOS

Hi,

After selecting at UNIFLASH the device (CC3220SF) and the TI's project "httpget" I push the button "CONNECT" , an error massage "Unhandled exception: XDS Power Off failure: 1" appear.

When I run the project in the debugger it runs OK.

What can cause this problem?

Best regards,

Uri

over 6 years ago

0 Sarah P over 6 years ago

TI__Mastermind 38980 points

Hi Uri,

What version of UniFlash are you using? Can you try connecting your LaunchPad to another USB port or try a new USB cable? Please be sure SOP jumpers are set to 100 or 010 for flashing mode.

Best regards,
Sarah

0 Uri Galil over 6 years ago in reply to Sarah P

Prodigy 40 points

Hi Sarah,

UniFlash version : 4.4.0.1922

I tried to connect with other USB cable and changed the SOP configuration (100 or 010) and always get the error massage:

Best regards,

Uri

0 Uri Galil over 6 years ago in reply to Uri Galil

Prodigy 40 points

Settings our LAUNCHXL card

Best Regards

Uri

0 Sarah P over 6 years ago in reply to Uri Galil

TI__Mastermind 38980 points

Hi Uri,

Your LaunchPad configuration looks correct.

Are you using Windows, Mac, Linux, etc? Can you try using UniFlash with a different computer?

Best regards,
Sarah

0 Uri Galil over 6 years ago in reply to Sarah P

Prodigy 40 points

Hi Sarah,

I'm using Windows 10.

With a different computer UniFlash works correct.

What could be the reason its not working on a new computer?

Best Regards

Uri

0 Sarah P over 6 years ago in reply to Uri Galil

TI__Mastermind 38980 points

Hi Uri,

I'll report the issue internally. UniFlash should be compatible with Windows 10.

Best regards,
Sarah

Wi-Fi

Wi-Fi forum

RTOS/CC3220SF-LAUNCHXL: RTOS/CC3220SF-LAUNCHXL