CC3220SF-LAUNCHXL: How to use AT command

Anandkumar T

Prodigy 30 points

Part Number: CC3220SF-LAUNCHXL
Other Parts Discussed in Thread: CC3220SF, UNIFLASH

Hi,

I am new to TI CC3220SF. So please explain how to use AT command in CC3220SF.

over 7 years ago

0 Jan D over 7 years ago

Guru 79945 points

Hi,

AT CC3220 SDK you find at_commands example (\examples\rtos\CC3220SF_LAUNCHXL\demos\at_commands\) . This example allow to use CC3220 as AT commands controlled device. More information you find here www.ti.com/.../swru534a.pdf

Jan

0 mustaqim shaikh over 6 years ago in reply to Jan D

Prodigy 140 points

Hi,
Have you figured out the solution, can u guide me, i am facing the same problem.

0 made4engineering over 6 years ago in reply to mustaqim shaikh

TI__Mastermind 27605 points

Please read the documentation for this as mentioned above

-Aaron

0 mustaqim shaikh over 6 years ago in reply to made4engineering

Prodigy 140 points

Hi,
Yes i have gone through this document, i have even made a library in terminal window as i used to do for other wifi chips. My point is i want to send this commands to the CC3220 uc through the terminal. What image do i have to load in the chip to get that working.
Please guide.

0 mustaqim shaikh over 6 years ago in reply to mustaqim shaikh

Prodigy 140 points

Thanlks for your concern friends.
I have figured out how to do it, Using uniflash we have to program the bin file of the at-commands which is under the simplelink_sdk folder. Then we can send the at_commands to CC3220 and get the feedback.

Wi-Fi

Wi-Fi forum

CC3220SF-LAUNCHXL: How to use AT command