• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 40 subscribers
  • Views 552 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UNIFLASH: UniFlash and CC3220SF

Luke Mills29
Prodigy 125 points
Part Number: UNIFLASH
Other Parts Discussed in Thread: CC3220SF

UniFlash: 4.4.0.2009

CC3220SF

I am trying to use UniFlash to load firmware onto the CC3220SF.

I tried loading .bin files generated by building demo projects which give me memory map errors

and i've tried loading the OOB project by following the instructions here: on page 10, but the instructions seem out of date as it is asking me to press the "manage projects button" and to upload a zip file. The button doesnt appear to exist and uploading a zip file seems to confuse it, additionally no bin file was generated when i built the project.

I'm not sure how to proceed. Please advise.

Thanks,

Luke

  • 0
    TI__Mastermind 40965 points
    Hi Luke,

    A more up-to-date tutorial on getting started with the CC3220 can be found here:
    dev.ti.com/.../

    That should walk you through how to load the OOB project, and run through a few simple tasks with the OOB example. Give those instructions a try. Let me know if you have trouble with that guide, or if you need other help.


    Regards,
    Michael