CC3220MOD: How to erase the contents on serial Flash by using UniFlash?

Tsurumoto

Genius 15354 points

Part Number: CC3220MOD
Other Parts Discussed in Thread: UNIFLASH

I'm referring to the answer #2 of .

How to erase the contents on SFLASH by using UniFlash Tool?

Is there a way to just clean up the contents of SFLASH without programming?

Best regards,

HaTa.

over 6 years ago

0 Manish_Thakur over 6 years ago

Genius 5085 points

Hello

Take one USB2serial convertor and connect your module via UART and open Uniflash .

Choose the proper port and format it after successful attempt then you program the service pack and its done.

0 Jesu over 6 years ago

TI__Mastermind 22935 points

Hello,

Thanks for the input Manish.

Go to Advanced->Files->Userfiles then click action dropdown and remove selected, check all files and apply.

Jesu

0 Tsurumoto over 6 years ago in reply to Jesu

TI__Genius 15354 points

Hi Jesu,

Thank you very much, I understand the way to erase the data existing on SFLASH.

So, is there a way to erase all areas on SFLASH by using UniFlash?

Best regards,
HaTa.

0 Jesu over 6 years ago in reply to Tsurumoto

TI__Mastermind 22935 points

Hello,

I believe every time you program with Uniflash it the flash gets formatted which I believe erases all content, adds file system and finally writes image files.

Jesu

0 Tsurumoto over 6 years ago in reply to Jesu

TI__Genius 15354 points

Thank you very much!

Wi-Fi

Wi-Fi forum

CC3220MOD: How to erase the contents on serial Flash by using UniFlash?