Linux/WL1835MOD: Bluetooth stack

Yaroslav,

Please refer to the following wiki guides.
processors.wiki.ti.com/.../TI_Bluetooth_Stack_for_WL18xx_-_Getting_Started_Guide

processors.wiki.ti.com/index.php/TI_Bluetooth_Stack_for_WL18xx_-_Demo_Guide

Best regards,
Vihang

Hello Vihang,

I need instructions for i.mx6 running linux

Can you help?

Thank you

Hi,

The instructions are the same for any Cortex-A processor based SoCs. Only the thing is the Bluetopia stack libraries are built with Linaro ARM tool chain with hard floating point option enabled .. So, please ensure the same in your builds and give it a try..

Thanks

Hello,

I have spent two days in an attempt to follow instruction on the wiki...

It is too much for me :)

I would really appreciate any help  with TI's Bluetooth stack for Linux on i.MX6

I don't want to abandon TI's product, but without your help I will not have other choice...

The wikis are too complicated for me...

Not sure, exactly which part you are finding it difficult. You, may start with trying the prebuilt demo samples in the SDK package. Ensure that the tty port number and BT_EN gpio are properly configured in the '/home/root/tibt/config' file.
processors.wiki.ti.com/.../TI_Bluetooth_Stack_for_WL18xx_-_Getting_Started_Guide

We, recommend checking with, 'Witekio' (3rd party) for WiLink8 integrations with non TI application processor ports..

Thanks

If you mention "SDK" please provide link for download, and installation instructions.
without this, it is useless information!

The latest Linux BluetopiaPM release is here. Try with the demo samples directly.

Thanks

www.ti.com/.../TI-BT-4-2-STACK-LINUX-ADDON

Thanks