• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 40 subscribers
  • Views 289 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

WL1831MOD：When WL1831 is connected to 2.4G/5G route, it cannot be successfully connected.

Meng jeffrey
Expert 2760 points
Part Number: WL1831MOD
Other Parts Discussed in Thread: WL1831

When I use the wifi module WL1831 of TI to connect to the 2.4G/5G route, it will not be able to connect successfully, and the protocol stack will crash. Please help analyze the reason.

  • 0
    TI__Mastermind 29301 points
    Meng,

    Do you only see this issue with a particular router or all 2.4G/5G routers?

    Additionally, please share the following information about your setup.
    - Operating system and host
    - Detailed steps of how you are connecting to the router
    - Any command line traces showing the crash of the protocol stack

    Best regards,
    Vihang