CC3120: AT command library available for CC3120?

JuMar

Part Number: CC3120

Hi,

A customer of mine wants to double check whether the AT command library as the one on the product page under technical documents is usable for the CC3120:

http://www.ti.com/lit/ug/swru534b/swru534b.pdf

On page 4 of the document the CC3120 is not mentioned as one of the supported platforms...

Hope you can clarify this for us!

over 6 years ago

0 Kobi Leibovitch over 6 years ago

TI__Guru 63006 points

Hi,

The AT command interface is supported from the applications MCU (it requires running a dedicated app on the CC32xx MCU).

It is intended for use by external hosts that interfaces the CC32xx.

It is not supported by the NWP directly, so basically it is not relevant for CC3120.

Br,

Kobi

0 JuMar over 6 years ago in reply to Kobi Leibovitch

TI__Prodigy 530 points

Hi,

If an MCU is used next to the CC3120, what program guide can be best followed?

Thanks!

0 Kobi Leibovitch over 6 years ago in reply to JuMar

TI__Guru 63006 points

The Network Processor Programmer Guide includes both information on the porting (ch 19) and on the API:

http://www.ti.com/lit/ug/swru455h/swru455h.pdf

br,

Kobi

0 Kobi Leibovitch over 6 years ago in reply to JuMar

TI__Guru 63006 points

The Network Processor Programmer Guide includes both information on the porting (ch 19) and on the API:

http://www.ti.com/lit/ug/swru455h/swru455h.pdf

br,

Kobi

Wi-Fi

Wi-Fi forum

CC3120: AT command library available for CC3120?