CC3120: Porting STM32F4 CC3120 noOS

Federico Gori

Part Number: CC3120
Other Parts Discussed in Thread: CC3100,

Good evening,

I'm working to port CC3120 driver with an STM32F4 with noOS host. Base on CC3100 SDK I have imported all the necessary driver but there are too much difference to deal with. There are a porting guide also with this new module.

Thank you soo much

Best regards

Federico

over 6 years ago

0 Jesu over 6 years ago

TI__Mastermind 22935 points

Hello Federico,

Please refer to our gen1 to gen2 migration guide. It talks about the differences in the SDKs and there is also a porting section.

http://dev.ti.com/tirex/content/simplelink_cc32xx_sdk_1_40_00_03/docs/simplelink_mcu_sdk/SimpleLink_Gen1_to_Gen2_SDK_Migration_Guide.html

Jesu

0 Federico Gori over 6 years ago in reply to Jesu

Prodigy 40 points

Hello Jesu,

Thank you for your answer.

I have a lot of problem with DPL. How can I customize it in order to work with STM32F4 with no OS?

Are there any example like AP mode in CC3100 SDK to understand how to implement all the functions required in user.h file (like SimpleLinkHttpServerEventHandler, SimpleLinkNetAppRequestEventHandler a so on)

thank you so much

0 Vincent Rodriguez over 6 years ago in reply to Federico Gori

TI__Mastermind 28285 points

Federico,

Are you moving a project with STM + CC3100 to STM+CC3120? My suggestion here is if possible start with a CC3120 example, and then add back in your custom code. There were alot of changes in the driver between CC3100 and CC3120, so it can be difficult to port.

Best Regards,

Vince

Wi-Fi

Wi-Fi forum

CC3120: Porting STM32F4 CC3120 noOS