• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 41 subscribers
  • Views 279 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

CC3220MODA: How to programming and debug FW to CC3220MODA?

CC3220MODA: cc3220MOD

MAHESH idupulapati
Prodigy 20 points
Part Number: CC3220MODA
Other Parts Discussed in Thread: CC3220MOD, CC3220S, UNIFLASH

hi,

    I am using cc3220s launchpad and cc3220mod . I flash my firmware to cc3220s launchpad but I am getting problem with cc3220mod  for programming using uniflash.which is best way to flash cc3220mod on my custom board. I give provision for (TCK,TMS,TDI,TDO,RST) to flash and UART TX,UARTRX.

  • 0
    Guru 39650 points

    Hi,

    For uploading code using Uniflash software you need to use UART (RX, TX, GND, RST) for debugging from CCS you need to use JTAG (TMS, TCK, TDI, TDO, GND). Additional information you find at original question which you linked here. Do not forgot set SOP mode 1-0-0 (2-1-0) at your module.

    If you provide hi quality photos how your module is connected to LaunchPad, I will say to you what you done wrong.

    Jan

  • 0 in reply to Hnz
    Prodigy 20 points

    Hi Jan,

               Thanks Jan for giving solution. I try both the methods its working.

    Mahesh Idupulapati,

    TechDNA Technologies.