WL1837MOD: Module output power + tolerances for product certifications

Colombo Carlo

Part Number: WL1837MOD

Hi everybody ,

I m certifing my product and I was asked :

"Detailed tune-up information for each mode with lower and upper tolerances –i.e for 802.11b, 802.11g. It would be good if power tolerance can be confirmed with modular vendor"

coudl you point me to where can I get this detail ?

thank you

best regards

Carlo

over 6 years ago

0 PM over 6 years ago

TI__Mastermind 27145 points

Hi Carlo,

We will look into it and get back to you ASAP. Please bear with us.

Thanks,

0 Seong Kim over 6 years ago

TI__Mastermind 48811 points

Colombo,

Please use this page for certification support request.

BR,

Seong

0 Colombo Carlo over 6 years ago in reply to Seong Kim

TI__Mastermind 25565 points

Hi Kim ,

I used that page but not able to find the information they are asking me ...

where can I find it ?

thks

Carlo

0 Seong Kim over 6 years ago in reply to Colombo Carlo

TI__Mastermind 48811 points

Colombo,

Output power can be viewed in the certification reports: http://www.ti.com/tool/download/WL18XX-REPORTS

For tolerances, at 2.4GHz it is +/2dBm and 5GHz it is +/-3dBm.

BR,

Seong

0 Colombo Carlo over 6 years ago in reply to Seong Kim

TI__Mastermind 25565 points

Hi Seong

OK thank you very much

let me reply them and give you feedbacks

best regards

Carlo

Wi-Fi

Wi-Fi forum

WL1837MOD: Module output power + tolerances for product certifications