CC3135MOD: SPI Flash programming

Anjanaa N

Part Number: CC3135MOD
Other Parts Discussed in Thread: CC3220MOD

Hi,

We are using CC3135MODRNMMOBR in our design.

For SPI flash programming, used the same tag connector TC2050-IDC-430 as in CC3135MOD booster pack with same pinouts.

Kindly, suggest a SPI flash programmer for CC3135MOD WiFi module.

With Regards,

Anjanaa

over 6 years ago

0 Jan D over 6 years ago

Guru 80805 points

Hi,

Please see this answer. It is for a CC3220MOD but this is same for CC3135MOD as well.

Jan

0 Anjanaa N over 6 years ago in reply to Jan D

Intellectual 400 points

Hi Jan,

I am having Segger J-Link. Can you clarify that it can be used for SPI flash programming of CC3135MOD.

Regards,

Anjanaa

0 Jan D over 6 years ago in reply to Anjanaa N

Guru 80805 points

Hi,

Sorry I am not able to answer your question. Please ask Serrer if this hardware can program SPI flash chip MX25R3235F. Because programming of CC3135MOD is about writing content into internal SPI flash chip. Also your programming hardware need to have capability hold device in reset by RST pin.

But according this list it looks that J-Link should work.

Jan

Wi-Fi

Wi-Fi forum

CC3135MOD: SPI Flash programming