CC3235SF: Can I use J-LINK from SEGGER to program CC3235SF?

Art Mecina

Part Number: CC3235SF
Other Parts Discussed in Thread: SEGGER, , CC3220SF

Hello Guys,

Good day.

Can J-LINK from SEGGER be use to program CC3235SF ?

CC3235SF is not part of the supported devices from J-Link, however CC3220SF is supported and they are both ARM Cortex-M4 Simplelink Wireless MCU, so I am thinking maybe CC3235SF can be supported as well?

J-link Supported Devices from TI: https://www.segger.com/downloads/supported-devices.php?model=jlink

Thanks to confirm!

Art

over 4 years ago

0 Sarah P over 4 years ago

TI__Mastermind 38980 points

Hi Art,

The CC3235 is supported, but it is important to clarify that the JTAG pins can only be used in development mode to temporarily load an image for debugging (until the device is reset). To program the device, you need to load a binary to the external serial flash which can be done via the UART.

For more details, please check out the device overview in the CC3235 Out of Box Experience.

Best regards,

Sarah

0 Art Mecina over 4 years ago in reply to Sarah P

TI__Genius 16585 points

Thanks for the confirmation Sarah!

Art

Wi-Fi

Wi-Fi forum

CC3235SF: Can I use J-LINK from SEGGER to program CC3235SF?