CC2652P: CC2652

Ankit Siddhapura

Part Number: CC2652P

Hi,

I have created zigbee network with one coordinator and 100 nodes as router, Using CC2652 zigbee devices and zstack version 3.0

I want to know, how many maximum devices can connect with coordinator? what should be ideal connectivity scenario to achieve good network communication and efficiency?

Thank you,
Ankit Siddhapura.

over 4 years ago

0 YiKai Chen over 4 years ago

Guru 735695 points

This is really depends the network traffic of your application. Just for your references, we had created a single Zigbee network with 130 ZRs and 530 ZEDs.

0 Ankit Siddhapura over 4 years ago in reply to YiKai Chen

Prodigy 50 points

YiKai Chen
Thank you for reply !
is it possible to connect 20 nodes with coordinator directly in first hop? I want maximum direct connection a coordinate can handle.
Regards,
Ankit Siddhapura

+1 YiKai Chen over 4 years ago in reply to Ankit Siddhapura

Guru 735695 points

Yes, I think that’s no problem by using CC2652P.

+1 Ryan Brown1 over 4 years ago in reply to Ankit Siddhapura

TI__Guru**** 220577 points

Hi Ankit,

You can refer to SWRA650 for the symbols which should be modified to allow for larger networks (note that the location of some have changed since the publication of this App Report). You will also need to increase the default NV memory allocation to support more TCLKs on the ZC, for more information please see the Z-Stack User's Guide -> Z-Stack Overview section.

Regards,
Ryan

Zigbee & Thread

Zigbee & Thread forum

CC2652P: CC2652