CC1352P: Memory address where the network properties are located ?????

albgarc2014

Part Number: CC1352P
Other Parts Discussed in Thread: SYSCONFIG

Hi TI

Please,

At which memory address (of the coordinator) are the following network properties located (stored / saved ...)?

ZCD_NV_PANID
ZCD_NV_EXTADDR
ZCD_NV_EXTENDED_PAN_ID
ZCD_NV_BDBNODEISONANETWORK*
ZCD_NV_NIB
ZCD_NV_NWK_ACTIVE_KEY_INFO
ZCD_NV_NWK_ALTERN_KEY_INFO
ZCD_NV_EX_NWK_SEC_MATERIAL_TABLE
ZCD_NV_EX_TCLK_TABLE
ZCD_NV_EX_TCLK_IC_TABLE
ZCD_NV_GROUP_TABLE

Sincerely, thank you very much!

Best regards

over 2 years ago

0 YiKai Chen over 2 years ago

Guru 735455 points

Try to refer to application NV memory items.

+1 Ryan Brown1 over 2 years ago

TI__Guru**** 202106 points

Hi albgarc,

The Internal non-volatile flash region is determined inside SysConfig -> TI DRIVERS -> NVS, by default it is located from 0x52000 to 0x56000. If you modify this then you will also need to change FLASH_NV_* definitions in the command linker (.cmd) file. By comparing a read of the flash memory contents against the SYS_OSAL_NV_READ results you will be able to determine the exact location of each NV item.

Regards,
Ryan

Zigbee & Thread

Zigbee & Thread forum

CC1352P: Memory address where the network properties are located ?????